Flow Switches

Pros

• Max Switch Voltage: 250 VAC
• Max Switching Current: 5 AMPS
• Resistance with Leads: 30 OHM
• Electrical Service Life: 200,000 Cycles
• Mechanical Service Life: 10,000,000 Cycles

Cons

• It might be too heavy for some people.

Pros

• Sensitivity adjusting screw
• Flow adjustment easy
• Four stainless steel paddles included: 1", 2", 3" & 6" (25, 50, 80, & 150mm)
• Minimum/maximum temperature: 32 degrees F/300 degrees F
• NPT

Cons

• It may not work.

Pros

• Low Cost
• Leak Proof Body
• Weatherproof

Cons

• It might not work if the pressure is too high or low.

Pros

• Temperature Limits: 230°F (110°C)
• Pressure Limits: 145 psig (10 bar)
• SPDT snap switch
• NEMA 4 (IP64) enclosure rating

Cons

• It might not work well in all conditions.

Pros

• Economical
• No-flow detector
• 0.5 Amp switch
• Rated 140 degree F
• Grey PVC Construction

Cons

• It can be clogged.

Pros

• High quality
• Temperature adaptability
• Adjustable flow control value
• Stable action repetition point
• Measures liquid

Cons

• It is difficult to control the water flow.

Pros

• 24" - 26" long leads
• 18 AWG wire
• SPDT switch type
• 0.15 set point differential (maximum)
• Fits many models

Cons

• It may not be durable.

Pros

• Quality stainless steel
• Corrosion resistant
• Service life long
• Suitable for water treatment systems

Cons

• It is a bit expensive.

Pros

• 18 AWG brass and 316 Stainless Steel wire
• SPST, N.O. switch type
• Maximum set point differential of 0.2V
• 50 micron filtration recommended

Cons

• It might not work with your plumbing.

Pros

• Wetted materials: Ryton, 316 Stainless Steel, Viton, Epoxy
• Electrical termination: 18 AWG, Zipcord
• Switch type: SPST, N.O. (20VA)
• Set point differential (maximum): 0.2
• Recommended filtration: 50 micron

Cons

• It might not be durable.

Pros

• Monitor flow
• Explosion-proof
• Leak proof lower body
• Weatherproof
• Electrical assembly can be easily replaced

Cons

• It's a bit expensive.

Pros

• Built-in copper baffle
• Simple structure
• Can have one-way valve role
• Level installation

Cons

• It might be too small for some people's needs.

Pros

• Flow Switch, 1 In SPDT
• For use with HVAC systems
• Protects equipment from dirt and debris buildup

Cons

• It might not work as expected.

Pros

• Selected Stainless Steel Materials
• Less likely to corrode and cause damage
• Long service life

Cons

• It may be clunky.